Setting Oven Controls; For A Silent Control Panel - Kenmore 790.7801 Series Use & Care Manual

Setting Oven Controls

Changing Between 12 or 24 Hour Time of Day Display
1. Press and hold
and "12h" or "24h" will appear in the display.
pad to switch between the 12 and 24 hour time of day display. The display will show either "12h" or "24h".
2. Press or
3. Wait 5 seconds to accept the change or press pad to reject the change.
4. Reset the correct time as described previously in To set the Clock. Please note that if the 24 hour time of day mode was
chosen, the clock will now display time from 0:00 through 23:59 hours.
To Set the Timer
The Timer Set/Off pad controls the Timer feature. The Timer serves as an extra timer in the kitchen that will beep when the
set time has run out. It does not start or stop cooking. The Timer feature can be used during any of the other oven control
functions, except during a self clean operation.
To set the Timer
Press Timer Set/Off pad. "-- --" will appear and "TIMER" will flash in the display.
1.
2. Press or pad to set the desired time in the display. Wait 5 seconds and the time will begin to count down with
the set time and "TIMER" will stay in the display.
3. When the set time has run out, "End" and "TIMER" will show in the display. The clock will beep 3 times every 7 seconds
until Timer Set/Off pad is pressed.
To cancel the Timer before the set time has run out: Press Timer Set/Off pad. The display will return to the time of day.
To Set Add 1 Minute Feature
The Add 1 Minute pad is used to set the Add 1 Minute feature. When the Add 1 Minute pad is pressed, 1 minute is added to
the Kitchen Timer feature if this feature is already active. If the Kitchen Timer feature is not active and the Add 1
Minute pad is pressed, the Kitchen Timer feature will become active and will begin counting down from 1 minute.
Temperature Conversion (Fahrenheit/Celsius)
The Broil pad controls the Fahrenheit or Celsius temperature display modes. The oven control can be programmed to display
temperatures in Fahrenheit or Celsius. The oven has been preset at the factory to display in Fahrenheit. Note: both ovens will
be changed at the same time.
To change display from Fahrenheit to Celsius or Celsius to Fahrenheit
Press Broil pad and hold for 6 seconds. A beep will sound, "---" will appear and "BROIL" will flash in the display. After
1.
6 seconds a beep will be heard and "F" or "C" will appear in the display. If "F" appears, the display is set to show
temperatures in Fahrenheit. If "C" appears, the display is set to show temperatures in Celsius.
pad to switch between Fahrenheit or Celsius display modes. The display will show either "F" or "C".
2. Press or
3. Wait 5 seconds to accept the change or press Stop pad to reject the change.

For a silent control panel

The Delay Start pad controls the Silent Control Panel feature. The Silent Control Panel feature allows the oven control to be
operated without sounds or beeps whenever necessary. If desired the control can be programmed for silent operation and
later returned to operating with all the normal sounds and beeps.
To change control from normal sound operation to silent control operation
Press and hold Delay Start pad for 6 seconds. A beep will sound, "-- --" will appear, "DELAY" will flash in the display.
1.
After 6 seconds, a beep will sound and "SP" (speaker) or "- -" will appear in the display.
pad to switch between normal sound operation and silent operation mode. If "SP" appears, the control
2. Press or
will operate with normal sounds and beeps. If "- -" appears, the control is in the silent operation mode.
3. Wait 5 seconds to accept the change or press Stop pad to reject the change.
Note: The control will always beep at the end of a minute timer and will beep when a set temperature has been reached,
even if the control is set to silent operation.
To Operate the Oven Light(s)
The interior oven light(s) will automatically turn ON when the oven door is opened. Press
and OFF whenever the door is closed.
pad for 6 seconds. "CLO" and the current time of day will appear in the display. A beep will sound
12
to turn the interior light(s) ON