Dell PowerConnect M8024-k User Manual page 61

Stacking PowerConnect 10G Switches: M8024-k, 8024, 8024F
3. Select System > Stack Management > Unit Configuration.
4. In the Switch ID field select 4 from the pull-down menu, and enter a 3 in the Change Switch ID
to field.
5. Click Apply.
Renumbering requires a reset of the switch and will clear the configuration of the interfaces on the
switch receiving the new Unit number. The resulting dialog box appears to warn the user.
6. Click OK if you agree.
7. After allowing a few minutes for the stack member to reload, select System > Stack
Management > Stack Summary again to see that the Unit has been renumbered.
59