Dell PowerConnect M8024-k User Manual page 33

Stacking PowerConnect 10G Switches: M8024-k, 8024, 8024F
10. Optionally, enable an SNMP Trap to be sent whenever a firmware sync is triggered; also if
desired, enable the Master to downgrade a new member unit even if the new unit has a
more recent firmware revision.
Note: Make sure you are making the following change on the switch that will become Master, which is
the switch with the highest MAC address during stack creation. Only the Master is required to have this
setting in order for firmware synchronization to work.
11. Click Apply.
The next screen will save the configuration to the Startup Configuration.
12. Select System > File Management > Copy Files from the main navigation menu.
13. Select the Copy Configuration option, using a Source of Running Config, and a Destination
of Startup Config.
31