Do you have a question about the 5505; 5525 and is the answer not in the manual?
Questions and answers
Sue Derrig
April 26, 2025
Top stitch not picking up from spool
1 comments:
Mr. Anderson
May 14, 2025
If the top stitch is not picking up from the spool on a Singer model 5505 or 5525, the issue is likely related to incorrect threading, tension problems, or needle condition. Here are detailed possible causes and solutions:
1. Incorrect Threading: - The machine may be threaded incorrectly. Ensure the thread passes through all thread guides, tension discs, and the take-up lever in the correct order. - Always thread the machine with the presser foot up to open the tension discs for proper threading.
2. Tension Issues: - If the upper thread tension is too tight or too loose, the stitch may not form. Adjust the tension dial to the recommended setting (usually between 3 and 5 for most fabrics). - Check that the thread is properly seated in the tension discs.
3. Needle Problems: - A bent, dull, or incorrectly inserted needle can prevent the top thread from forming a stitch. Replace the needle and ensure it is fully inserted with the flat side facing the correct direction (usually to the back).
4. Bobbin Case or Hook Timing: - If the timing between the needle and hook is off, the hook may not catch the upper thread to form a stitch. This usually requires adjustment by a technician.
5. Thread Quality or Type: - Poor quality or incompatible thread can cause threading issues. Use good-quality thread suitable for your fabric.
6. Presser Foot Position: - Make sure the presser foot is down when sewing. If it is up, the tension discs stay open, and the thread won’t engage properly.
7. Bobbin Threading: - Ensure the bobbin is correctly inserted and threaded in the bobbin case. An incorrectly threaded bobbin can prevent proper stitch formation.
Check and correct these issues step by step to restore proper stitching.
Need help?
Do you have a question about the 5505; 5525 and is the answer not in the manual?
Questions and answers
Top stitch not picking up from spool
If the top stitch is not picking up from the spool on a Singer model 5505 or 5525, the issue is likely related to incorrect threading, tension problems, or needle condition. Here are detailed possible causes and solutions:
1. Incorrect Threading:
- The machine may be threaded incorrectly. Ensure the thread passes through all thread guides, tension discs, and the take-up lever in the correct order.
- Always thread the machine with the presser foot up to open the tension discs for proper threading.
2. Tension Issues:
- If the upper thread tension is too tight or too loose, the stitch may not form. Adjust the tension dial to the recommended setting (usually between 3 and 5 for most fabrics).
- Check that the thread is properly seated in the tension discs.
3. Needle Problems:
- A bent, dull, or incorrectly inserted needle can prevent the top thread from forming a stitch. Replace the needle and ensure it is fully inserted with the flat side facing the correct direction (usually to the back).
4. Bobbin Case or Hook Timing:
- If the timing between the needle and hook is off, the hook may not catch the upper thread to form a stitch. This usually requires adjustment by a technician.
5. Thread Quality or Type:
- Poor quality or incompatible thread can cause threading issues. Use good-quality thread suitable for your fabric.
6. Presser Foot Position:
- Make sure the presser foot is down when sewing. If it is up, the tension discs stay open, and the thread won’t engage properly.
7. Bobbin Threading:
- Ensure the bobbin is correctly inserted and threaded in the bobbin case. An incorrectly threaded bobbin can prevent proper stitch formation.
Check and correct these issues step by step to restore proper stitching.
This answer is automatically generated
What manual goes for model singer model 5525