Controls And Functions; Digital Display - American DJ Scan 250 User Instructions

Scan 250™
TOP
4
3
1. Breaker - A 5A built-in safety breaker to reduce the risk of electrical
shock or fire and protect the circuitry. In the case of a internal short or
power surge.
2. Power Cord Inlet - This unit is equipped with a removable I.E.C.
power cord. Be sure to only use the power cord included with the
unit, this cord is designed to match the electrical requirements of the
unit. Other cords may cause the unit to overheat or malfunction. Volt-
age may vary from venue to venue, when connecting this unit to a
power supply be sure to connect to a matching power outlet. Never
use this fixture if the ground prong has been removed or broken off.
The ground prong is designed to reduce the risk of fire or electrical
shock in the event the unit suffers from an internal short.
3. XLR Input Jack - This jack is used to accept an incoming DMX
signal or Master/Slave signal.
4. XLR Output Jack - This jack is used to transmit the incoming
DMX signal to another DMX fixture, or transmit a Master/Slave signal
to the next Scan 250™ in the chain. For best results in DMX or Master/
Slave mode terminate this jack if it is the last unit in the chain. See
"Terminator" on page 8.
American DJ - www.americandj.com - Scan 250™ Instruction Manual Page 5
®

Controls and Functions

1
2
Scan 250™
LED
ENTER DOWN
1 2 3
1. Digital Display - This display shows the menu and operating func-
tions.
2. Enter Button - This button is used confirm a function when working
in the system menu.
3. Down Button - This button is used to scroll backwards when navi-
gating through the system menu.
4. Up Button - This button is used to scroll forward when navigating
through the system menu.
5. No Button - This button is used to deselect a function.
6. Yes Button - This button is used to select a function.
American DJ - www.americandj.com - Scan 250™ Instruction Manual Page 6
®

Digital Display

Control board
UP NO YES
4 5 6