Controls And Functions - American DJ XP-3 User Instructions

XP-3™
TOP
1
2
3
4
5
6
BOTTOM
11
12
American DJ - www.americandj.com - XP-3™ Instruction Manual Page 9
© ®

Controls and Functions

7
8
9
10
1
13
XP-3™
1. Lens -
This is a fully focusing high quality lens. Focus the lens by manually
turning the lens in a clockwise or counter-clockwise direction until the
image is in focus.
2. XLR Output Jack -
This jack is used to transmit the incoming DMX signal to another DMX
fi xture, or transmit a Master/Slave signal to the nest XP-3™ in the
chain. For best results in DMX or Master/Slave mode, terminate this
jack if it is the last unit in the chain. See "Terminator" on page 7.
3. XLR Input Jack -
This jack is used to accept an incoming DMX signal (from a universal
DMX controller) or Master/Slave (from the output jack of another
XP-3™) signal.
4. MINI/C Controller Jack -
This jack is for use with the optional MINI/C Blackout controller only.
See page 7 for details on the MINI/C controller. Do not attempt to con-
nect an audio signal this jack, this will damage the PC board and void
your manufactures warranty!
5. Power Cord Connection -
The power connection uses an I.E.C. type connector, use only a power
cord that matches this type of connection. Be sure to only connect
this unit to a power outlet that matches the printed power label on the
unit. Never use a power when the ground prong has been removed or
broken off. The ground prong is used to reduce the risk of electrical
shock in case of an electrical short. .
6. Fuse Holder -
This housing stores the 5 amp GMA protective fuse. Always
replace with the exact same type fuse, unless other
an authorized American DJ
®
7. Lamp Socket Cover Thumb Screw -
This thumb screw holds the lamp socket assembly cover (16) into
place.
8. Lamp Socket Cover -
This thumb screw holds the lamp socket cover (16) into place.
American DJ - www.americandj.com - XP-3™ Instruction Manual Page 10
© ®
Controls and Functions
"Terminator" on page 7.
"Terminator"
service technician.
wi s e i n structed, by