Appendix B: Attaching The Lanyard To The Al1; Anhang B: Attaching The Lanyard To The Al1; Apéndice B: Attaching The Lanyard To The Al1 - Samson AirLine Owner's Manual

Uhf wireless system ax1 handheld transmitter, al1 presentation transmitter, ar1 receiver ur1 receiver um1 receiverd

Hide thumbs Also See for AirLine:

Table of Contents

Available languages

Samson AirLine

1. Pass the cord from the Transmitter tie clip through the holes on

the top rear of the AL1. The clip may have to be rotated (and can

be removed) to reveal the exit hole. See page 16 in this manual for

further instructions. (For clarity, all the illustrations in this

Appendix show the AL1 with the tie clip removed.)

Appendix B: Attaching the Lanyard to the AL1

Transmitter

Tie Clasp

AL1 Tie Clip

Screw

2. Pull the cord all the way through and lift it over the clasp,

making a loop. Pull the clasp through the loop taking up the slack.

Table of Contents

Show Quick Links

Table of Contents

Airline ax1 Airline ar1 Airline ur1 Airline um1 Al1