Washer Dimensions - Electrolux SATF7000FS1 Installation Instructions Manual

Front load washer
Hide thumbs Also See for SATF7000FS1:
Table of Contents

Advertisement

Available languages

Available languages

Installed
Washer
Dimensions
50.8" (129cm)
to clear open door
_,_--
freestand
washer
on _oor
floorline
washer mounted on
optional pedestal
floorline
29.75"(75.5cm)*
to front of closed door
water supply
connection
on rear of unit _
_'_
27.0" --
(68.5cm)
l
drain hose
on rear
of uniP
51.25"
(130cm)
36.0"
(9t.5cm)
!
To obtain these minimal depth dimensions, dryer must be vented straight back. Using a quick-turn 90 ° elbow (right or down on freestanding dryer) adds approximately 0.75 in. (2.0 cm)
to installation depth. Upward venting of exhaust on pedestal-mounted
or freestanding dryer adds approximately 4 in. (10.2 cm) to installation depth. Leftward venting on
pedestaFmounted
or freestanding dryer adds approximately 3.75 in. (9.5 cm) to installation depth. Downward venting of exhaust on pedestaFmounted
dryer adds approximately
2.25 in. (5.7 cm) to installation depth.
_Hot and cold inlet hose length approximately 43 inches (109cm)
2Power supply cord length approximately 60 inches (t52.5cm).
3Drain hose length approximately 52 inches (132cm).
29.75"
(75.5cm)*
to front
of closed
door
r--
50.8" (129cm)
to clear open door
71.5"
(t82cm)
water supply
connection
on rear of unit _
gas supply
pipe on rear
of gas unit
37"
(94cm)
27.0'
(68,5cm)
power cord
on rear of unit 2
electrical
supply on
rear of unit
on rear
of uniP
centerline
height for
rear vent
39"
(99cm)
* To obtain these minimal depth dimensions, dryer must be vented straight back. Using a quick-turn 90° elbow (right) adds approximately 0.75 in. (2 cm) to installation depth.
Upward venting of exhaust on stacked dryer adds approximately 4 in. (10.2 cm) to installation depth. Downward venting of exhaust on stacked dryer adds approximately
2.25 in. (6.5 cm) to installation depth. Leftward venting of exhaust on stacked dryer adds approximately 3.75 in. (9.5 cm) to installation depth.
_Hot and cold inlet hose length approximately 43 inches (109cm)
2Power supply cord length approximately 60 inches (152.5cm).
3Drain hose length approximately 52 inches (132cm).

Advertisement

Table of Contents
loading

Table of Contents