Wireless Subwoofer Controls; Specifications - Polk Audio SurroundBAR SDA Owner's Manual

WIRELESS SUBWOOFER CONTROLS

1 Volume—Adjusts the volume of the subwoofer to balance
with the SurroundBar SDA.
2 LED—Shines green when the wireless subwoofer is active
and orange when it's in standby mode.
3 Channel ID Switch—Selects the "channel" for the wireless
subwoofer signal. Don't forget to select the same
"channel" on the SurroundBar SDA.
4 Power Connection—The subwoofer power
cord connects here.
5 Power Fuse—Protects the wireless subwoofer.
Only replace with equivalent rating and type.
6 Power Switch—Turns the wireless subwoofer on
and off, but you can leave it on all the time if you wish.
One-Step

Specifications

System Power
Dimensions
Weight
Power Rating
Model
Customer Service Hours of Operation: Monday-Friday, 9
3
VOLUME CHANNEL ID
2
1 2 3 4
MIN MAX
1
130 Watts
SurroundBar SDA 3 7/8" H x 31 3/4" W x 4 5/8" D
(100mm x 807mm x 118mm)
SurroundBar SDA 5 3/8" H x 31 3/4" W x 4 5/8" D
(with cradles) (137mm x 807mm x 118mm)
Subwoofer 10" H x 10 1/4" W x 10 1/4" D
(254mm x 261mm x 254mm)
SurroundBar SDA 8.7 lbs (3.9kg)
Subwoofer 9.1 lbs (4.1kg)
SurroundBar SDA 24 Vdc, 2.7 A
Wireless Subwoofer 100-240 Vac, 50/60 Hz, 1A
SurroundBar SDA Instant Home Theater
-6
AM
4
100-240V~ 50/60Hz 1A
POWER
6
FUSE
T3.15AL/250V
5
polkcs@polkaudio.com
PM EST
5