Component Checklist - Heatrae Sadia SUPREME 150 Instructions And User Manual

INTRODUCTION
Thank you for purchasing a Heatrae Sadia Supreme. The Boiling
water heater is manufactured to the highest standards and has been
designed to meet all the latest relevant safety specifications.
This Heatrae Sadia water heater must be installed (Sections 1-5),
commissioned (Section 7) and maintained (Sections 8-9) by a
competent person. Please read and understand these instructions
prior to installing your Heatrae Sadia water heater. Following
installation and commissioning the operation of the heater should be
explained to the user (Section 11) and these instructions left with them
for future reference.
This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision
or instruction concerning the use of the appliance by a person
responsible for their safety. Children should be supervised to ensure
that they do not play with the appliance.

COMPONENT CHECKLIST

Before commencing installation check that all the following
components have been supplied with your Supreme heater.
•
•
•
•
•
•
•
2
Wall mounting bracket
No.12 x 2" screws (2 off)
No.8 x 1" screw (1 off)
No.12 x 2" wall plug (2 off)
No.8 x 1" wall plug (1 off)
15mm x 15mm straight push-fit connector
15mm x 15mm 90° elbow push fit connector