Download Print this page

Technical Specifications - Nexus Metal Detectors User Manual

Analogue induction balance (ib) metal detector
Hide thumbs Also See for Metal Detectors:

Advertisement

only. Do not use detergents or abrasives and avoid getting water in the
control boxes.
When storing the detector for long periods or when shipping, the batteries
should be removed.
Avoid storing the detector in areas where it will be exposed to extreme
temperatures, dust, moisture or contaminants.
Do not attempt to modify or repair the detector or allow any unauthorised
repair centre to do so.
GUARANTEE
The Nexus Standard SE metal detector is guaranteed for a period of 24
months from date of purchase against all manufacturing defects or loss of
performance.
The Control Box is sealed and contains no user-serviceable parts Opening
the Control Box will invalidate the Guarantee.
This Guarantee does not cover:
Damage due to dropping, impact or accident
Damage due to improper use or care of the detector
Damage resulting from leakage of batteries
Damage to the coil or coil cable
In the event of any problem, pleases contact. Any detector returned under
Guarantee must be properly packed and be sent by insured carrier. The
sender is responsible for any loss or damage in transit.
A full repair and replacement parts service is available.

TECHNICAL SPECIFICATIONS

Operating Frequency Range: 4.2 - 18 kHz (subject to search coil in use)
Coil Design: Twin Concentric Overlapping
Coil Weights:
9" :700g
6" :460g
4" :400g
Weight (with dual 9" coil): 1.9 kg (with 8AA batteries or Nexus rechargeable
pack and coil cover included)
11

Advertisement

loading

This manual is also suitable for:

Standard se