Advertisement
GENERAL DESCRIPTION
The Nexus Standard SE is an Analogue Induction Balance (IB) metal
detector that operates in the very low frequency (VLF) range and it is
designed for use on in land sites and salt water beaches.
It may be used in either of the following basic modes of operation; for In
Land mode - All-Metal, Discriminate, Voltage Controlled Oscillator or
combination between them; for salt water Beach Mode - All-Metal,
Discriminate, Voltage Controlled Oscillator or combination between them.
The Nexus Standard SE is designed to be a general-purpose metal
detector, capable of finding both small and large targets at extreme depths.
However if used with any of the accessory search coils available from the
SE range the Nexus Standard SE will be one of the most versatile metal
detectors available on the market.
The standard coil supplied is the dual 9" SE Standard and this is ideal for
most searching operations. The mentioned above SE range of accessory
search coils is available for optimum performance when searching for the
tiniest targets in difficult conditions or performing a general field survey. All
of the coils are capable of finding the largest and smallest of targets.
To obtain the best results with the Nexus Standard SE, as with all metal
detectors, it is essential to understand the settings and operation of the
detector. Some experience in metal detecting will be beneficial. Users may
need to practice and experiment in order to obtain the best possible results
on any particular site. All sites and soils are different and settings that will
give good results on one site may be less successful if used elsewhere.
The Nexus Standard SE is designed to detect the very deepest of targets
and operates near to the limits of what is achievable with induction balance.
Each Nexus Standard SE is hand-built so that there may be minor cosmetic
differences between individual units. Each search coil is tuned to a slightly
different frequency within the design range, to minimize interference from
other Nexus detectors. Performance values for all Nexus Standard SE
detectors will be identical.
2
Advertisement
