Advertisement
CONTROLS
The Nexus Standard SE has seven primary control knobs and one toggle
switch control. Six of the rotary controls are located on the front of the
control box and the seventh is located on the back of the Meter box. The
toggle switch control is located underneath the Meter box.
Power switch
The Power switch is located on the front of the control box
and it is combined with the Volume control knob. It turns the detectors on or
off.
Meter Sensitivity
The meter provides visual discrimination analysis in all
modes. The Meter Sensitivity control is a rotary knob on the back side of
the meter housing. It controls the strength of the meter needle reaction.
Discrimination
This knob sets the level of the discrimination. Rotating the
Discrimination knob clockwise (Accept) will DECREASE the level so that
more iron is detected. Generally, the discrimination level should be set as
low as is possible; to avoid masking the smallest and deepest desired
targets.
4
Advertisement
