Related Manuals for Terratek TT8503T
Summary of Contents for Terratek TT8503T
- Page 1 Oscillating Power Tool TT8503T User Manual – Please read and retain for future reference.
- Page 2 Contents Parts List Technical Information Safety Instructions Using your tool Maintenance Warranty Accessories A Sanding pad 32mm Wood blade Scraper D Bolt Washers Sanding sheets G HSS segment saw blade H Diamond segment saw blade Wrench...
- Page 3 Fig.1 A- On/Off switch B- Variable speed control C- Tool holder D- Battery E- Battery F- Charging adapter G- Power supply Fig.2 Fig.3...
-
Page 4: Parts List
Fig.4 Fig.5 Parts List Description Description Screw M8X12 Switch Outside Flange Screw ST3X10 Spindle Switch Housing Rubber Casing Contact Circlip for Shaft 26 Left Plastic Housing Spline Spring Washer Variable speed switch Bearing 6000 Battery Cover-Front Block Steel NI-PLATED Bushing Pole End Plate Screw ST4x24 Armature Paper... -
Page 5: Exploded Assembly Diagram
Exploded Assembly Diagram NOTICE: Actual product may vary from pictures shown. -
Page 6: Technical Information
Technical Information Voltage: 10.8v DC Battery: 1300 mAh Lithium-ion Speed: 5000 - 16000 min Oscillating angle: 3° Noise pressure level: 72.0 dB(A) 3 dB(A) Uncertainty : Noise power level: 83.0 dB(A) Uncertainty: 3 dB(A) Oscillation emission value: 2.83m/s Uncertainty: K = 1.5 m/s N.W./G.W.: 1.5/1.8kgs Battery:... -
Page 7: Important Safety Information
Read and Keep This Manual Please read carefully all instructions within this manual. Failure to follow all safety warnings can result in serious personal injury. The term “Power Tool” in all of the following warnings refers to your mains operated (corded) or battery operated (cordless) power tool Important SAFETY Information This symbol is to warn you of potential personal injury hazards. -
Page 8: Personal Safety
Always try to avoid body contact with grounded surfaces, such as radiators, cooking ranges and any other fixed appliance with metal surfaces. Do not expose your power tool to wet or damp conditions and NEVER use in rain. Check regularly the power cord of your machine and any extension cord that you are using for damage. -
Page 9: General Safety Instructions
GENERAL SAFETY INSTRUCTIONS Read this owner's manual completely and make sure you understand all of its safety guidelines. 1. KEEP GUARDS IN PLACE and in working order. 2. REMOVE ADJUSTING KEYS & WRENCHES. Before turning on the power tool, make sure the keys and adjusting wrenches have been removed. -
Page 10: Additional Safety Rules For Oscillating Tools
27. Double Insulated tools are equipped with a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a polarized outlet. -
Page 11: Package Contents
Wear protective gloves when changing cutting accessories. Accessories become hot after prolonged usage. Use thick cushioned gloves and limit the exposure time by taking frequent rest periods. Vibration caused by the tool may be harmful to the hands and arms. Before scraping, check work piece for nails. -
Page 12: On-Off Switch
Assembly 1. Turn the Power Switch off and unplug the tool. 2. Place the attachment over the Spindle, shoulder facing away from the tool. Line up the holes on the attachment with the pins on the Spindle shoulder. Note: The Angled Cutter Blade should only be used in the straight ahead position and not an angled position. -
Page 14: General Maintenance
Defective or dead batteries must be recycled according to the directive 2006/66/EC. Accessories CAUTION: Use only accessories or attachments recommended for use with your Terratek tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. -
Page 15: Environmental Protection
All provisions of Annex 1 of Council Directive 2004/108/EC – EMC directive EN60745-1:2009 EN60745-2-4:2009 All provisions of Annex 1 of Council Directive 2006/42/EC – the Machinery Directive RoHS Directive - 2002/95/EC Mr. Alan Garnett, UK QA Manager Environmental Protection RECYCLING: WASTE ELECTRICAL PRODUCTS SHOULD NOT BE DISPOSED OF WITH HOUSEHOLD WASTE.