NETGEAR MBR1515 User Manual page 80

Lte broadband 11n wireless router

Hide thumbs Also See for MBR1515:

Table of Contents



To set up remote management:

Select ADVANCED > Advanced > Remote Management.

Note:

Be sure to change the router's default login password to a secure

password. The ideal password should contain no dictionary words from any

language and contain uppercase and lowercase letters, numbers, and

symbols. It can be up to 30 characters.

Select the Turn Remote Management On check box.

Under Allow Remote Access By, select the extent of external IP addresses that are allowed

access to the router's remote management.

Note:

For enhanced security, restrict access to as few external IP

addresses as practical.

•

To allow access from a single IP address on the Internet, select Only This Computer.

Enter the IP address that is allowed access.

•

To allow access from a range of IP addresses on the Internet, select IP Address

Range. Enter a beginning and ending IP address to define the allowed range.

•

To allow access from any IP address on the Internet, select Everyone.

Specify the port number for accessing the web management interface.

Normal web browser access uses the standard HTTP service port 80. For greater

security, enter a custom port number for the remote web management interface. Choose

a number from 1024 through 65535, but do not use the number of any common service

port. The default is 8080, which is a common alternate for HTTP.

LTE Broadband 11n Wireless Router MBR1515

Advanced Settings

Table of Contents