Static Routes - NETGEAR MBR1515 User Manual

your account, and registers your new IP address. If your host name is hostname, for
example, you can reach your router at http://hostname.dyndns.org.
On the ADVANCED tab, select Advanced > Dynamic DNS to display the following screen:

To set up Dynamic DNS:
1. Register for an account with one of the Dynamic DNS service providers whose URLs
appear in the Service Provider list.
2. Select the Use a Dynamic DNS Service check box.
3. Select the URL of your Dynamic DNS service provider. For example, for DynDNS.org,
select www.dyndns.org.
4. Type the host name (or domain name) that your Dynamic DNS service provider gave you.
5. Type the user name for your Dynamic DNS account. This name is the name that you use to
log in to your account, not your host name.
6. Type the password (or key) for your Dynamic DNS account.
7. Click Apply to save your configuration.

Static Routes

Static routes provide more routing information to your router. Under usual circumstances, the
router has adequate routing information after it has been configured for Internet access, and
you do not need to configure more static routes. You have to configure static routes only for
unusual cases such as multiple routers or multiple IP subnets on your network.
As an example of when a static route is needed, consider the following case:
• Your primary Internet access is through a cable modem to an ISP.
• You have an ISDN router on your home network for connecting to the company where
you are employed. This router's address on your LAN is 192.168.1.100.
LTE Broadband 11n Wireless Router MBR1515
Advanced Settings
77