NETGEAR XWN5001 User Manual page 9

The following illustration shows an existing Powerline network with one Powerline device in
Room 1, a second Powerline device in Room 2, and a Powerline 500 WiFi Access Point
(XWN5001) in Room 3:
Room 1
Figure 3. Powerline access point connected to the Powerline network and wireless network
To form a Powerline network you need at least two compatible Powerline devices (including
the Powerline 500 WiFi Access Point).
For best performance, plan the location of your Powerline devices:
• Use an electrical outlet that is not controlled by a wall switch to avoid someone
unknowingly turning off the power to the outlet.
• Do not plug Powerline products into a power strip, extension cord, or surge protector as
this might prevent them from working correctly or reduce the network performance.
• Avoid plugging Powerline products into electrical outlets located near an appliance that
uses a lot of power, such as a washer or dryer, or a refrigerator. This could potentially
prevent the Powerline devices from working correctly, or reduce network performance.
Powerline 500 WiFi Access Point (XWN5001)
Room 2
Powerline
Getting Started
9
Room 3
XWN5001
Powerline