Setting Times And Scheduling Firewall Services; Procedure 3-4: Setting Your Time Zone - NETGEAR FR328S Reference Manual

FR328S Cable/DSL ProSafe Firewall with Dial Back-Up
• To delete an existing Service, select its button on the left side of the table and click Delete.
Modify the menu shown below for defining or editing a service.
3.
Click Apply to save your changes.
4.

Setting Times and Scheduling Firewall Services

The FR328S Firewall uses the Network Time Protocol (NTP) to obtain the current time and date
from one of several Network Time Servers on the Internet. In order to localize the time for your
log entries, you must select your Time Zone from the list.

Procedure 3-4: Setting Your Time Zone

In order to localize the time for your log entries, you must specify your Time Zone:
Log in to the firewall at its default LAN address of http://192.168.0.1 with its default User
1.
Name of admin , default password of
address you have chosen for the firewall.
3-14
Figure 3-10: Add Services menu
password , or using whatever Password and LAN
Protecting Your Network