Procedure 2-5: Wizard-Detected Dynamic Ip Account Setup - NETGEAR FR328S Reference Manual

Note: You will no longer need to launch the ISP's login program on your PC in order to access
the Internet. When you start an Internet application, your firewall will automatically log you
in.
Domain Name Server (DNS) Address: If you know that your ISP does not automatically
3.
transmit DNS addresses to the firewall during login, select "Use these DNS servers" and enter
the IP address of your ISP's Primary DNS Server. If a Secondary DNS Server address is
available, enter it also.
If you enter an address here, after you finish configuring the firewall, reboot your PCs so
that the settings take effect.
Click on Apply to save your settings.
4.
Click on the Test button to test your Internet connection. If the NETGEAR website does not
5.
appear within one minute, refer to

Procedure 2-5: Wizard-Detected Dynamic IP Account Setup

If the Setup Wizard determines that your Internet service account uses Dynamic IP assignment,
you will be directed to the menu shown in
Figure 2-9: Setup Wizard menu for Dynamic IP address
Connecting the Firewall to the Internet
FR328S Cable/DSL ProSafe Firewall with Dial Back-Up
Chapter 6, Troubleshooting".
Figure 2-9 below:
2-11