Connecting The Fr328S Firewall To The Internet - NETGEAR FR328S Reference Manual

FR328S Cable/DSL ProSafe Firewall with Dial Back-Up
Connect to the Internet
3.
You are now connected to the firewall. If you do not see the menu above, click the Setup
a.
Wizard link on the upper left of the main menu. Click the Yes button in the Setup Wizard.
Please click Next to follow the steps in the Setup Wizard to input the configuration
b.
parameters from your ISP to connect to the Internet.
Note: If you were unable to connect to the firewall, please refer to

Connecting the FR328S Firewall to the Internet

The firewall is now properly attached to your network. You are now ready to configure your
firewall to connect to the Internet. There are two ways you can configure your firewall to connect
to the Internet:
• Let the FR328S auto-detect the type of Internet connection you have and configure it.
• Manually choose which type of Internet connection you have and configure it.
These options are described below. In either case, unless your ISP automatically assigns your
configuration automatically via DHCP, you will need the configuration parameters from your ISP
you recorded in "Record Your Internet Connection Information" on page
2-8
Figure 2-6: Setup Wizard
"Basic Functions" on page
2-3.
Connecting the Firewall to the Internet
6-1.