Safety Notice To prevent fire or electric shocks please read the instruction before installing, using and cleaning the television. l Please read all the instructions before operation; l Please keep the manual for future reference ; l Do not use any accessories that are not recommended by the manufacturer: l Before operation, make sure the operating voltage of this unit is corresponds with your house electrical supply;...
Front Panel Control SOURCE MENU SOURCE MENU (The figure above and the description of the button may be d ifferent, all picture in this manual is just for reference, please see the actual set.) Control Panel Function 1. Standby switch 2.
Connection STOP PLAY/PAUSE OPEN/CLOSE PREV NEXT DVD insert Just take one TV with DVD for example, please see the real) (Please refer to actual product of the DVD slot and buttons) HDMI Connect to HDMI Component/S-Video output of other Audio Input equipment connect to the digital amplifier...
Remote Control (for TV/DVD Combi) When using the remote control, aim it towards the remote sensor on the TV STANDBY P.MODE S.MODE OPEN/CLOSE SCAN SLEEP INFO MENU PLAY ZOOM SWAP CH.LIST PROGRAM ANGLE AUDIO NICAM F WD PREV D.MENU SETUP PAUSE/STEP STOP SEARCH SLOW D.CALL...
Remote Control (for TV/DTV only) When using the remote control, aim it towards the remote sensor on the TV STANDBY P.MODE S.MODE SCAN SLEEP INFO MENU ZOOM SWAP CH.LIST INDEX SUBCODE TEXT REVEAL TIME SIZE (For TV without DVD Models) Buttons on the remote control Stand By NICAM...
Installing Batteries Installing Batteries 1.Open the cover of the battery compartment at the back of the remote control. 2.Insert two AA alkaline batteries in the compartment. (plus and minus poles to respective mark) 3.Replace the cover of the battery compartment. Precautions Make sure that there is no obstacle between the remote...
Connection Instructions Grounding Ensure that you connect the grounding / earth wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes. External Equipment Connections Antenna Connection - Antenna or Cable Service with a Cable Box Connections...
Connection Instructions VGA Input You can use your LCD-TV as a monitor for your personal computer using a VGA cable (not supplied). Connection and use steps: 1.Read the user guide supplied with your computer and ensure that it has a VGA connector; 2.Make sure that the power of the LCD -TV and the PC are off;...
Connection Instructions (If connected to S-Video,select the S-Video external input source.) 3. Refer the DVD player's manual for operating instructions. Component Input ports To get better picture quality, connect a DVD player to the component input ports as shown below. S-VIDEO Input - To avoid picture noise (interference), leave an adequate distance between the VCR and TV...
Connection Instructions SCART Input 1.Connect the scart lead from the external device(DVD players, settop boxes or game consoles, to the TV SCART socket. 2.Set the mode of the LCD-TV to SCART. 3. Press Play button on external equipment and it should appear on the screen.
Basic Operating Instructions Turn on the LCD-TV When the POWER(STANDBY) button on the remote control is pressed and the LCD-TV is turned on, the indicator light on the front of the LCD-TV changes from red to green. When the LCD-TV is turned off using the POWER(STANDBY) button, the LCD-TVwill go into standby mode and the indicator light turns red.
Basic Operating Instructions Sound Mode Press S.MODE button on the remote control for menu display . For desired mode as follows: Standard Music Theatre Voice Personal Select the TV Channel You can use the number keys on the remote control to directly select TV channels.
Menu Operations 1. Press MENU button to display the main menu, and main menu . 2. Press to scroll through the options 3. Press buttons to make changes to the parameters 4. Press MENU to exit the menu step by step 5.
Menu Operations NOTE: Using your remote control to navigate in the on-screen menus. The on-screen menus shown in this manual may be different from those on your TV. These are example to illustrate your TVs operation. Picture Menu Options Picture quality can be adjusted for any input separately . The picture quality on the screen can be adjusted as follows: 1.
Menu Operations Auto Sync: Adjust the picture location frequency and phase parameters automatically in PC. H.Position: Picture horizontal adjust. V.Position: Picture vertical position adjust. Size: Adjust the size of the LCD to match the PC input source. Phase: Removes any horizontal distortion and clears or sharpness the displayed characters.
Menu Operations Note: Bass and Treble can be adjust in any audio mode, and if the numerical value is changed, the audio mode will be changed to personal automatically. Balance : Adjust the audio output between left and right speakers. AVL: Automatic Volume Limit Control .
Menu Operations Lock Menu Options 1. Press MENU button and EXIT 2. Press OK button to display the following menu . Press the number buttons (0~9) to enter the password. 0000. If you forget your password, you can enter lock menu), the lock menu opens. 3.Press button to go up and down to select the desired option .
Menu Operations Lock Menu Options Continued Change Password Menu Lock Program Set Program No . Source Lock Child Lock EXIT Menu Lock: Press to select To set Tuning, the search function will be locked, to set Main Menu, you will need input the password if you want to operation any menu.And you can resume it by setting Off or operate Clear Lock.
Menu Operations Lock Menu Options Continued Max Volume Initial Volume Tuning Program Clear Lock Parental Lock EXIT Max Volume: Press to adjust. If a certain value is set, when volume is being adjusted, the sound value can not exceed that maximum volume value. Initial Volume: Used to memory the volume you have set when you turn on our TV after turn off it.
Menu Operations Tuning Menu Options 1. Press MENU and screen Note: This menu only appears in TV and DTV mode . 2. Press button to enter the tuning menu and go up and down to select the desired option . 3.Press button to increase and decrease the level to adjust the selected option to your preference .
Menu Operations Tuning Menu Options Continued You can press EXIT button to enter the submenu and then select Yes to exit the tuning absolutely. The first time you press MENU button the menu will display on the screen, and you can select Yes ,the ATV tuning will be skipped. The second time you press MENU button the menu will display on the screen, and you can select Yes ,the DTV tuning will be skipped.
Menu Operations Tuning Menu Options Continued PROGRAMME GUIDE 10 Mar 2004 15:04 5 five 16 QVC 17 UK Gold 23 bid-up.tv 25 TCM 26 UK Style EXIT The colour of the circle is corresponding with the buttons on the bottom of the remote control.
Menu Operations Time Menu Options 1. Press MENU and screen 2. Press button to enter the time menu and go up and down to select the desired option . 3.Press button to increase and decrease the level to adjust the selected option to your preference .
Menu Operations Time Menu Options Continued Press to select Repeat and hour and minute. (The Hour and Minute can not be available when Repeat is off). If you have finish the adjustment, select Close and then press OK to exit. On Time: Used to set the time that the TV comes on automatically.
TELETEXT Teletext is an information system, broadcast by certain channels, which can be read like a newspaper . It also provides subtitles for people with hearing difficulties or those who are unfamiliar with the language in which a particular program is being broadcast (cable networks, satellite channels, etc.).
TELETEXT Teletext MODE HOLD SIZE REVEAL TIME Language change Pressing the button will change the Teletext characters between Eastern and Western. Hold Pressing the button will stop the teletext page automa- tically updating. This feature is very useful where there are several teletext pages or data on the same page number.
Basic Playback Basic Playback Preparations Operate the remote to set the TV to DVD status Note: The unit do not allow enter DVD mode again (or place a DVD in the disc slot)after it have just left to avoid any damage of the DVD. Wait for 10 seconds to enter again.
Advanced Playback Advanced Playback IMPORTANT NOTE: ALL DESCRIBING FUNCTION IS FOR DVD DISCS. IF YOU PLAY OTHER FORMAT DISC, THE OPERATION AND DISPLAY ON SCREEN MAY DIFFERENT. SUBTITLE Press " SUBTITLE ", the screen will display "SUBTI-TLE 01/XX XXXXX", "01" indicates the ordinal number of this language;...
Special Function Playback JPEG DISC PLAYBACK Insert a picture CD or JPEG picture CD into the tray and the disc will be loaded automatically. If the disc type can be identified, the player will start showing the pictures one by one (slide show mode).If a navigation menu will be displayed use the navigation buttons to select a file, then press the PLAY button.
DVD System Setup DVD System Setup General Setup Process 1.Press the SETUP button, the General Setup Page, Preference Page will be displayed in turn. SETUP 2.Press CH+/- b item, then press submenu. 3.Press CH+/- bu to select then press OK to confirm. 4.Press SETUP repeatedly to exit the set-up menus.
DVD System Setup(Continued) DVD System Setup General Setup Page Angle Mark: Users can select a particular camera angle when playing a DVD which offers multiple angles. This item allows you to set Angle Mark On or Off. On Screen Display (OSD) Language: Users can select on-screen display language.
DVD System Setup(Continued) DVD System Setup SETUP PLAY Preference Page The Preference Page is only available when there is no disc in the player. These settings are applied consistently to all discs which are inserted and played. TV Type: This player supports different TV output, including AUTO, NTSC, and PAL systems.
DVD System Setup(Continued) DVD System Setup Default: (except password and parental lock status) for this DVD player SETUP back to the manufacturers original settings. Press OK to perform the reset. Note: Some functions may not be available depending on the type of disc. PLAY Resets all settings ..Preference Page..
Playable Discs The following discs can be played: Support discs: DVD, CD-R, CD-RW, HDCD, JPEG, CD+G, Kodak CD , W MA. You cannot play discs other than those listed above. You cannot play non-standardized discs, even if they may be labeled as above. The performance of CD-R or CD-RW disc is depend on the way of disc-burning.
Dics Protection and DVD Characteristics Compare DVD disc with other discs: Encode Digital/MPEG method Single- Double side -side Capacity single- single -layer layer 4.7G 8.5G Playing Time minutes minutes 12cm Disc diameter Horizontal More than 500 line resolution Picture Multiple kinds proportion Subtitle 48KHz, 96KHz/...
Troubleshooting Guide To assist in location possible faults use help guide Troubleshooting No picture, no sound Blank screen No sound Poor sound No picture in some channel No color for some channel program (black and white) Spots with some or all pictures Television out of control Note:...
Specifications Specifications of the television that you have just purchased may vary from the information in this table due to technical innovations. Model Picture, sound system Audio output COMPONENT input PC input S-VIDEO input Audio input External input port SCART Power requirements Power consumption Temperature...