Settings; Figure 33: Load / Save Configuration Page - Sierra Wireless AirCard User Manual

AirCard Hub User Guide

Settings

The settings page is used to back up or restore the AirCard Hub's configuration or to
reset it to factory defaults.

Figure 33: Load / Save Configuration Page

Note: To perform an update, you must be logged into the AirCard Hub as the root user (see
the Administration section on page 54 for more details).
To save a copy of the AirCard Hubs configuration:
1. Enter the root manager Password and click Save.
This will download a copy of the AirCard Hub's current settings to your PC.
Note: Do NOT edit the contents of the file downloaded file; if you modify it, you might not be
able to use it to restore the AirCard Hub's configuration later.
You can change the name of the file but the filename extension must remain ".cfg".
To restore the AirCard Hub's configuration using downloaded file:
1. Click Browse.
2. Select the configuration file you wish to restore.
3. Click Restore under Restore saved settings.
To restore the AirCard Hub's configuration to the factory defaults:
1. Click Restore under RESTORE FACTORY DEFAULTS.
The AirCard Hub will then restart.
52 2400164