LAN 1 / WAN Tab
This tab allows you to configure the WAN port function. You can select from the
following types of WAN connection:
Unless the LAN1/WAN port was previously configured as WAN port, you will be
prompted with the following warning message.
Click OK to continue; the System Status page will open. From this page, in the
Ethernet Port Status section, you can select LAN1/WAN port to be a LAN port or
WAN port. Then click Home to go back to the basic status page and to continue
configuring your LAN1/WAN port.
Figure 10: Advanced View - Status
Rev 1 Feb. 2012
•
DHCP (Automatic Configuration – default)
•
Static (fixed IP)
Operating Modes
31