Figure 11: Power User - Lan1/Wan Tab - Sierra Wireless AirCard User Manual

AirCard Hub User Guide
DHCP
The default setting is DHCP mode. In this mode network settings are automatically
configured via DHCP protocol for the existing connection offered by an ADSL modem
or xDSL device. To use this, select DHCP from the WAN Connection Type drop-down
menu and click Save.
STATIC (Fixed IP)
With Static (Fixed IP) mode, you must enter the network information for the
connection. To use this, select STATIC (fixed IP) from the WAN Connection Type
drop-down menu, enter the required IP Networking information, and then click Save.

Figure 11: Power User - LAN1/WAN Tab

Field
IP Address
Subnet Mask
Gateway
Primary / Secondary DNS Server
In Power User mode, the AirCard Hub also offers a standalone wireless network that
provides access to any connected USB storage devices. These can be accessed by
both Ethernet and wireless users by using the network address: \\swi.hub.
32
Definition
Enter the IP Address the AirCard Hub will use
for the WAN port connection.
Enter the Subnet Mask the AirCard Hub will use
for the WAN port connection.
Enter the Gateway IP Address the AirCard Hub
will use for the WAN port connection.
Enter the DNS Server IP Addresses the AirCard
Hub will use for the WAN port connection.
2400164