Event Code Descriptions; A.1: Transmission Format Between Dact And Receiver; A.2: Ademco Contact Id Typical Printout - Gamewell GF505 Series Installation, Programming, And Operation Manual

Ademco Contact ID Format Event Code Descriptions
APPENDIX A
This appendix describes the various Event Codes and their messages which are available for the
Ademco Contact ID Format.
A.1 Transmission Format Between DACT and Receiver
The transmission string for the Ademco Contact ID Format is as follows:
SSSS 18 QXYZ GG CCC where
SSSS
18
Q
XYZ
GG
CCC
Notes:
1. 18, which is used in the reporting structure to identify the transmission as Contact ID, is not
printed out in the alarm and trouble report.
2. GG Group Number is fixed at '00' and cannot be changed.
3. CCC for Zone Number is transmitted as '001' for zone 1 up to '010' for zone 10
A.2 Ademco Contact ID Typical Printout
A typical printout from a Central Station receiver (such as the Ademco 685) of alarm and trouble
reports in the Ademco Contact ID Reporting Structure follows:
Time Date
11:28 03/25
11:28 03/25
11:28 03/25
11:28 03/25
11:28 03/25
11:28 03/25
11:28 03/25
11:28 03/25
11:28 03/25
11:28 03/25
Notes:
1. 11 is an example of a Receiver/Line Card, showing which receiver and line card the message
was transmitted to.
2. Q, which is the Event Qualifier for the reporting structure, is printed out in the report as an E
for New Event or R for New Restore.
126
Ademco Contact ID Format

Event Code Descriptions

= Four digit Subscriber ID Account Code
= Identifies transmission as Contact ID to the receiver at the Central Station
= Event Qualifier where 1 = New Event and 3 = New Restore
= Event code
= Group number
= Zone number
Rcvr/Line ID SSSS
11 7777
11 7777
11 7777
11 7777
11 7777
11 7777
11 7777
11 7777
11 7777
11 7777
Transmission Format Between DACT and Receiver
QXYZ GG CCCC
E110 00 C001 - general fire alarm on zone one
E111 00 C002 - smoke detector alarm on zone two
E380 00 C003 - fault on zone three
E570 00 C009 - Zone nine disabled
R110 00 C001 - Zone one alarm restored
R111 00 C002 - smoke detector zone two restored
R380 00 C003 - zone three fault restored
R570 00 C009 - zone nine reenabled
E158 00 C006 - high temperature, zone six
E151 00 C007 - gas detected, zone seven
GF505 & GF510 Series PN 53164:A 3/26/2007