Installing Your Refrigerator; Unpacking Your Refrigerator; Leveling Your Refrigerator; Proper Air Circulation - Haier HSL04WNA User Manual

English
English

Installing Your Refrigerator

UNPACKING YOUR REFRIGERATOR

1. Remove all packaging material. This includes the foam base and all adhesive
tape holding the refrigerator accessories inside and outside.
2. Inspect and remove any remains of packing, tape or printed materials before
powering on the refrigerator.

LEVELING YOUR REFRIGERATOR

• Your refrigerator has two leveling legs which are located in the front corners of
your refrigerator. After properly placing your refrigerator in its final position, you
can level your refrigerator.
• Leveling legs can be adjusted by turning them clockwise to raise your refrigerator
or by turning them counterclockwise to lower your refrigerator. The refrigerator
door will close easier when the leveling legs are extended.

PROPER AIR CIRCULATION

• To assure your refrigerator works at the maximum efficiency it was designed for,
you should install it in a location where there is proper air circulation, plumbing
and electrical connections.
• The following are recommended clearances around the refrigerator:
Sides...............3/4 "(19mm)
Top....................2" (50mm)
Back..................2" (50mm)
ELECTRICAL REQUIREMENT
• Make sure there is a suitable power Outlet (115 volts, 15 amps outlet) with proper
grounding to power the refrigerator.
• Avoid the use of three plug adapters or cutting off the third grounding in order to
accommodate a two plug outlet. This is a dangerous practice since it provides no
effective grounding for the refrigerator and may result in shock hazard.
5