Table of Contents
Advertisement
SYSTEM OVERVIEW
Fire & Emergency
The fire and emergency protection portions of your system are always on and will
Protection
sound an alarm if an alarm condition is detected.
Alarms
When an alarm occurs, the control's buzzer, the keypad and external sounders will
sound, and a message at the keypad will identify the zone(s) causing the alarm. In
addition, an alarm message will be sent to the connected central monitoring station.
You may stop the sound by pressing the SILENCE/RESET button at the control,
or by entering the OFF sequence (user code + OFF key) at your keypad .
Memory Of Alarm
When an alarm, supervisory or trouble condition occurs, the keypad displays the
number(s) of the zone(s) that caused the problem, and displays the type of
condition present (ex. Fire, Alarm, Supv., Check). The display remains until it is
cleared by entering the OFF sequence (user code + OFF key) a second time or
by pressing the SILENCE/RESET button a second time if no keypad is present.
– 4 –
Hide quick links:
Advertisement
Table of Contents
