Emergency Alarms; General; Silencing And Resetting An Emergency Alarm - ADEMCO 5110XM User Manual

EMERGENCY AND 24 HOUR NON-FIRE ALARMS

General

Your system may have sensors which detect non-fire related alarm conditions, such as the
unauthorized opening of a stock room door, the triggering of an HVAC (Heating,
Ventilating, or Air Conditioning) temperature sensor, the pressing of a holdup alarm
button, etc. Your system may provide some or all of the indications listed below,
*Except for silent alarms
depending on what your installer selected to occur when one of those conditions is
detected.
If your system's keypad has any active emergency alarm key(s) (see REMOTE KEYPAD
EMERGENCY KEYS section) these indications may be manually triggered by pressing the
appropriate emergency key.
• The control's buzzer and keypad buzzer both produce a steady sound*.
• The external alarm sounders produce a steady sound*.
• The keypad LCD (Fixed-Word) displays the word "ALARM" and the zone number in
• An emergency alarm message is sent to the central station.
Silencing
To silence the control and keypad
and Resetting
buzzers and external alarm
an Emergency Alarm
sounders:
The keypad's LCD will display the
number of the zone in alarm as
a Memory of Alarm indication.
alarm. Alpha keypads also display a description of the zone in alarm*.
A A A A L L L L A A A A R R R R M M M M 0 0 0 0 2 2 2 2
T T T T E E E E M M M M P P P P E E E E R R R R A A A A T T T T U U U U R R R R E E E E
A L P H A
Press the control's
SILENCE/RESET button or enter
your User Code + the OFF key.
– 1 6 –
AWAY SUPV NO AC
PHONE TEST
BYPASS
NOT READY
STAY
ALARM
CHIME BAT
FIRE
CHECK INSTANT TAMPER
FIXED-WORD
To reset the keypad alarm display
and turn off the SILENCED LED at
the control: First correct the cause of the
alarm condition, and then:
Press the SILENCE/RESET button
again or re-enter your User Code,
followed by the OFF key.