ADEMCO 5110XM User Manual page 20

• A trouble message is sent to the central station.
Note: If your keypad LCD displays "0C" for more than 5 minutes, then it is not
receiving signals from the control. CALL YOUR INSTALLER IMMEDIATELY FOR
SERVICE.
Silencing To silence the control and keypad
and Resetting buzzers:
a Trouble Indication
SILENCE/RESET button or enter
The keypad's LCD will display the
number of the zone in trouble as
a Memory indication.
TROUBLE CONDITIONS
Press the control's
your User Code, + the OFF key.
– 2 0 –
To reset the keypad
display: First have the cause of the
trouble condition corrected, and then:
Press the SILENCE/RESET button
again or re-enter your User Code,
followed by the OFF key.
trouble