Advertisement
Usage Instruction
W a r n i n g
W a r n i n g
This product adopts AC 220V voltage.
The plug shall be connected to sole-purpose 220V socket.
Installation Method
This product is usually a built-in type fridge put in fridge cabinet.
When you want to block up the fridge on a level floor, you have to use solid and flameproof materials, and
you must not use foam used during the transportation of the fridge.
Don't put the fridge near a heat source or under direct sunshine,
which may affect the performance of the fridge.
Don't put the fridge in a extreme cold or warm place especially
outside a room, which may affect the performance of the fridge.
6
Usage Instruction
Preparation
Take off foams and adhesive tapes fixing the fridge.
Check the materials inside the fridge.
User Manual Pin Discharge Pin Wine shelf Egg Plate Ice Plate Ice Spade
Clean the fridge before usage. (Refer Page 23)
To reassure the normal and stable operation of the fridge, power
the fridge only after 30 minutes of cleanness.
When use the fridge the first time after installation, power the fridge
also 30 minutes after installation.
Record the fridge name and model in the Warranty for reference.
7
Advertisement
