Advertisement
Installation Sequences
3. Put the refrigerator into the cabinet
1. Put the refrigerator into cabinet, don't squeeze the cord.
Damaged power cord may cause fire disaster.
2. Connect the power.
(If the socket is at the back of the cabinet, first connect the power before put the refrigerator cabinet into
its place.)
3. For safeties, put the power switch in off position, and the switch of the whole room as well.
Draw the cord from the hole at the back of the refrigerator cabinet.
Put the refrigerator into the cabinet.
The clearance-adjusting sheet shall stick tightly with side panel.
The front of the upper fixing plate shall align with the end surface of the side panel.
The left and right clearance between refrigerator and the cabinet shall be kept the same.
Adjust hex screw to adjust the refrigerator's height, and adjust the uprightness and horizon. (Screwdriver
can be found in the installation kit.)
The side surfaces of hinge shall be fastened by screws _.
(2 pieces: 1 screw is fastened on the first hinge, and another one on the 4
Fasten the other hole on hinges after installation of the refrigerator door.
upper surface
Refrigerator
(Plane Diagram)
cabinet
Refrigerator Door
End surface of clearance
adjusting sheet
Front line of side surface
Upper fixing plate
th
hinge)
34
Installation Sequences
The front of the refrigerator cabinet door shall be adjusted by square or steel rule and "A"
and "B" shall be the same.
Position
Adjustment
foot cover is put at the back of the foot, and fasten its left side by wood screw. (1 piece)
Fasten the other parts of the foot after the refrigerator door is installed.
Upper surface
Square
(Plane Diagram)
"B"
"A"
35
Advertisement
