Exposure - Samsung SVD-4300 User Manual

Operating Your Camera
SMART ZOOM :
'SMART ZOOM' is acted by motion perception. 'SMART ZOOM' acts zoom as
'TARGET ZOOM' that is established if motion is sensed. (Condition : when all
'MOTION DET MODE' and 'SMART ZOOM MODE' are 'ON') 'SMART ZOOM'
returns as 'START ZOOM' after delay as 'DWELL TIME' establishing after action.
FOCUS SETUP
MODE
ZOOM TRK
ZOOM SPEED
D-ZOOM
DISP ZOOM MAG
ZOOM POS INIT
LENS INIT
SMART ZOOM
END
You can change 'SMART ZOOM' function
establishment if press SET button after select 'SMART
ZOOM' article in FOCUS SETUP MENU.
•MODE : You can establish mode using left or right button
•START ZOOM : You use left or right button in
'START ZOOM' article you can select
zoom position to return after
'SMART ZOOM' action from 1 times to 9 times.
•TARGET ZOOM : When uses one side or right button in 'TARGET ZOOM' article
and senses motion, you can select zoom position to act from 2
times to 10 times.
•DWELL TIME : You use left or right button in 'DWELL TIME' article. You can choose
time to delay before return to 'START ZOOM' position after zoom
motion at 'TARGET ZOOM' position from 1 second to 20 seconds.
END: To revert to the main setup menu.
28
COLOR CCD CAMERA User's Manual
AUTO
ON
FAST
OFF
OFF
OFF

EXPOSURE

EXPOSURE SETUP
BRIGHTNESS
IRIS
SHUTTER
AGC
SSNR
SENS-UP
END
1. Press the SET button to access the main setup menu and then position the
indicator over 'EXPOSURE' using the UP or DOWN button.
2. Press the SET button to confirm.
BRIGHTNESS: Use this feature to adjust image brightness. Position the
indicator over 'BRIGHTNESS' using the UP or DOWN button.
Then increase or decrease brightness level using the LEFT or
RIGHT button while verifying the changes on screen. Set END
once desired level is obtained.
EXPOSURE SETUP
BRIGHTNESS
IRIS
SHUTTER
AGC
SSNR
SENS-UP
END
COLOR CCD CAMERA
25.......
AUTO
---
NORMAL
LOW
OFF
25.......
AUTO
---
NORMAL
LOW
OFF
29
User's Manual