Zte NCN 2101-EPI/CE User Manual page 96

2. Click Config > Basic Parameter > Basic Information to
go to Basic Information Setting window, as shown in
Figure 80; Type in the name of the device in the DevName
field. DevID is the ID number shown in the section
"Creating Encoder and Camera on Management Client"
above. Copy the ID number and paste it here, then click
Save to save the settings.
F 8 0 B
I G U R E A S I C
Setting in Telnet Way
1. Click Start > Run at the bottom left of your computer
to open the Run window, as shown in Figure 81. Enter
"cmd" in the Open field, and click OK to confirm.
I
N F O R M A T I O N
Confidential and Proprietary Information of ZTE NETVIEW
Appendix C
83