Zte NCN 2101-EPI/CE User Manual page 68

Chapter3 Configuration and Operation
After relevant parameters are set, click Save button to save the
settings.
F 5 9 A B P
I G U R E L A R M A S I C A R A M E T E R
A lar m Li nk age
This is to set the state of DI for alarm giving. When DI reaches
this state, the DO output and video recording &d picture
capturing are triggered.
Click Config > Alarm Parameter > Linkage Parameter to
go to Alarm Linkage Parameter window, as shown in Figure
60;
Select a DI channel, and click Read to display the current state.
Check Linkage Enable box and select an Alarm State, the DO
channel, the recording and snapshot channel to be linked. Then
drag your mouse to select alarm time, blue ones indicate the
55
Confidential and Proprietary Information of ZTE NETVIEW