Zte NCN 2101-EPI/CE User Manual page 92

F 7 5 E
I G U R E N C O D E R
5. Set the extension information of the camera, as shown in
Figure 76.
Encoder Device: add camera under a specified

encoder. This item will be selected automatically. Just
confirm it is the one you set in step 2 above.
Input Port: the port through which the camera is

connected to the encoder, 1-16 generally. When more
than one camera is configured under a same encoder,
their access ports must be different.
A
D D E D
Confidential and Proprietary Information of ZTE NETVIEW
Appendix C
79