Operational Parts Identification; Choosing The Right Location - Univex BC14 Operation Manual

BC14 OPERATIONAL PARTS IDENTIFICATION
CAUTION: Before plugging the unit in or connecting to electrical source, make sure that the
power source matches the voltage of the BC14 specifications plate rating.
The Bowl Cutter is shipped fully assembled from the factory and requires no set-up.
FIGURE 1 BC14 BOWL CUTTER
1. ON / OFF Switch 4. Bowl Cover Latch
2. Legs 5. Bowl Cover
3. Indicator Light 6. Bowl

CHOOSING THE RIGHT LOCATION

Make certain that the BC14 is placed on a stable and level surface. Make sure the area has
easy access to a power outlet and allows the operator ample room for operation and cleaning of
the unit.
4 04/09