Related Manuals for Univex BC14
Summary of Contents for Univex BC14
- Page 1 MODEL BC14 Bowl Cutter Operations Manual Persons under age 18 are not permitted to operate or have accessibility to operate this equipment per U.S. Dept. of Labor Employment Standards Administration Fact Sheet No. ESA91-3. BC14 Revision A 04/07/2009...
-
Page 2: Table Of Contents
TABLE OF CONTENTS Safety Statement ………………………………………………………………..3 Operational Parts Identification …………………….………………………..4 Choosing the Right Location ……………….……….………………………..4 Bowl Cutter Operation……………………….…….…………………………….5 Cleaning………..…………………………….……….…………………………..6 Warranty Statement…………….……………………………………………….7 04/09... -
Page 3: Safety Statement
It is a Federal Violation of United States Department of Labor regulation to permit operation of the BC14 by any person(s) under the age of 18 years. Read and make sure that you understand the instructions and safety warnings in this booklet before attempting to operate this machine. -
Page 4: Operational Parts Identification
6. Bowl CHOOSING THE RIGHT LOCATION Make certain that the BC14 is placed on a stable and level surface. Make sure the area has easy access to a power outlet and allows the operator ample room for operation and cleaning of the unit. -
Page 5: Bowl Cutter Operation
If the bowl is not securely fastened, the switch will not engage and the unit will not run. Locate the BC14 Bowl Cover Latch (Figure 1, Item 4) at the rear of the cover. This locks into place by closing the cover securely and turning the handle in a counterclockwise motion. The bowl cover MUST be locked into place or the ON/OFF switch cannot be activated. -
Page 6: Cleaning
CLEANING 1. Before cleaning the unit, make sure the BC14 is switched off and the power cord is disconnected from the power outlet. 2. Rotate the bowl cover-locking knob (Figure 1, Item 4) counterclockwise to release the bowl cover. Remove the cover from the unit by lifting it off the shaft. -
Page 7: Warranty Statement
Warranty The Univex BC14 carries a one-year, on-site parts and labor warranty against any defects in materials or workmanship. The one-year period begins on the date of purchase by the end user and remains in full effect provided the unit is...