Cruising In Other Conditions - Yamaha E8D Owner's Manual

2. Place the tilt lock lever in the release po-
sition.
3. Slightly tilt the outboard motor up. The tilt
support bar will lock automatically, sup-
porting the outboard motor in a partially
raised position.
NOTE:
The outboard motor is equipped with 2 or 3
positions for shallow water cruising.
4. To return the outboard motor to the nor-
mal running position, place the gear shift
lever in neutral, then place the tilt lock le-
ver in the lock position.
5. Slightly tilt the outboard motor up. Slowly
tilt the outboard motor down while pulling
the tilt support bar lever up.
6. Slowly lower the outboard motor to the
normal position.
EMU28190

Cruising in other conditions

Cruising in salt water
After operating in salt water, wash out the
cooling water passages with fresh water to
prevent them from becoming clogged with salt
deposits.
NOTE:
For cooling system flushing instructions, see
page 26.
Operation
24