Table of Contents
Advertisement
Keypad Lights
The keypad uses lights to indicate various conditions, such as
whether your system is on or off, the status of protective points,
whether there is a system trouble, and whether there is an alarm.
Light
On
No Delay
1 to 8
All
Part
OK
71-07374-000-B Users Guide.p65
Function
Lights when the system is All or Part On. Flashes
during exit delay and when an alarm occurs
Lights when the system is All or Part On without
entry or exit delay. Flashes during Step Outside
function.
Point lights show the status of each point. When a
point light is on steadily, that point
been turned on. When the point light is winking,
the point is faulted. When the point light is
flashing, an alarm is indicated.
Lights when the system is All On. When the
system is off, the All light comes on when all
points are ready to turn on (no doors or windows
are open). Winks when turning All On with door or
windows open.
Lights when the system is Part On. When the
system is off, lights when 'Part' points are ready to
turn on. Flashes when changing passcodes.
Flashes when an alarm occurs. Winks when there
is a system trouble.
7
has
7
08/21/2001, 1:05 PM
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Security System and is the answer not in the manual?
Questions and answers
I have not used my system in a long time and forgot the passcode
To reset the passcode for a Radionics Security System:
1. Make sure the system is off (the "On" light is off).
2. Press the 5 key. An OK tone will sound, and the display will change.
3. Enter your current passcode. The "Part" light will flash, and your user number will appear.
4. Enter a new passcode with the same number of digits as your old one. If an error tone sounds, return to step 1 and try a different new passcode.
5. Enter the new passcode again. If the OK tone sounds, the system exits change passcode mode. If an error tone sounds, start over.
This answer is automatically generated