Table of Contents
Advertisement
24-Hour Points
24-hour points are always on, even when the system is turned off.
There are two types of 24-hour points, Fire points and Non-Fire points.
Fire Points
Fire points only monitor fire detection devices, such as smoke
detectors. They are always on and cannot be turned off.
Non-Fire 24-Hour Points
Non-fire points are always on and cannot be turned off.
Keypad Keys
Your keypad has 15 keys. These keys perform various functions,
as described below.
1, 2, 3, 4, 5, 6, 7, 8, 9, 0
Each of the numeric keys performs a different function. For a
description of each, refer to the section of this guide that describes the
various system functions.
CLEAR
Use the CLEAR key to exit any function and start over.
A
A special function may be assigned to this key by your security
company. For your system this key_________________________.
B
A special function may be assigned to this key by your security
company. For your system this key_________________________.
C
A special function may be assigned to this key by your security
company. For your system this key_________________________.
This key is not used.
6
71-07374-000-B Users Guide.p65
6
08/21/2001, 1:05 PM
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Security System and is the answer not in the manual?
Questions and answers
I have not used my system in a long time and forgot the passcode
To reset the passcode for a Radionics Security System:
1. Make sure the system is off (the "On" light is off).
2. Press the 5 key. An OK tone will sound, and the display will change.
3. Enter your current passcode. The "Part" light will flash, and your user number will appear.
4. Enter a new passcode with the same number of digits as your old one. If an error tone sounds, return to step 1 and try a different new passcode.
5. Enter the new passcode again. If the OK tone sounds, the system exits change passcode mode. If an error tone sounds, start over.
This answer is automatically generated