Frigidaire GLEB27Z7HBC Installation Instructions Manual page 8

Only certain cooktop models m ay beinstalled
over c ertain built-in electric o ven models, listed by
theMFG IDnumber ( see theinsert s heet i ncluded
intheliterature p ackage).
s"
To reduce the risk of
personal injury and
tipping the wall oven,
the wall oven must be
secured to the cabinet(s)
by properly installed
mounting screws.
208/240V junction box for
built-in oven.
4 I/2"
(11.4 cm)
Max.*
Side filler panels are necessary to
isolate the unit from adjoining
cabinets. Panel height should
allow for installation of approved
cooktop models.
36" Min.
(91.4 cm)
Use 3/4" (1.9 cm) plywood, installed
on two runners, flush with toe plate.
Must be capable of supporting 150
pounds (68 kg).
Cut an opening in wood base
minimum 9" x 9", 2" (23 x 23, 5
cm) from left side filler panel, to
route armored cable to junction box
or fuse box.
* If no cooktop is installed
directly over the oven unit, 5"
(12.7 cm) maximum is
allowed.
27" (68.6 cm) 24 7/8" (63.2 cm) Min. 28 1/8" (71.4 cm) Min.
Wall Oven 2B 1/4" (64.1 cm) Max. 23 1/2" (59.7 cm) Min. 28 5/8" (72.7 cm) Max.
Figure 12- SELF CLEAN MODELS ONLY
TYPICAL UNDER COUNTER INSTALLATION OF AN ELECTRIC BUILT-IN OVEN
WITH AN ELECTRICCOOKTOP MOUNTED ABOVE