Route Electrical Wiring - Maytag DK724Q1ASS0 Installation Instructions Manual

Excessive Weight H azard
Usetwoor more people to move andinstall
dishwasher.
Failure t o dosocanresult i nbackorotherinjury.
1. Measure cabinet opening height from floor to bottom of
countertop.
Place corner packaging on the floor and place dishwasher on
its back.
Adjust leveling legs based on the cabinet opening
measurement and the chart below.
2.
3.
Electrical Shock Hazard
Disconnect electrical power at the fuse box or circuit
breaker box before installing dishwasher.
Failure to do so can result in death or electrical shock.
Follow all national and local codes and ordinances for completing
electrical supply to cabinet.
Option 1: Right-hand side utility route
\
Route wire through 1V2"(3.81 cm) hole located 8" (20.32 cm) above
the floor.
After routing the electrical wire through the right-hand hole,
attach the wire to back left-hand side of cabinet wall 8"
(20.32 cm) above the floor. Then continue routing the wire along
the left-hand side of cabinet opening to the front of the opening.
H
33_" (85.7 cm)
34" (86.3 cm)
34 _" (8& 7 cm)
34¼" (87cm)
34 _" (87.3 cm)
4.
:X
:0"
: _" (0.3 cm)
:¼" (0.6 cm)
:_" (1 cm)
:V2" (1.3 cm)
H :X
34½" (87.6cm) :_" (1.6 cm)
34_" (87.9 crn) :_" (1.9 cm)
34 _" (88.3 cm) : _" (2.2 cm)
34_" (88.6cm) :1" (2.5 cm)
35" (88.9 cm) :1 _" (2.9 cm)
Place dishwasher in upright position.
8