REINSTALL NUTS AND HINGE COVER
14. Place the door on its edge. Assemble the 2 machine
screws (#8),washers, and nuts. Tighten using a
wrench and screwdriver.
1E Place the hinge cover.in position. Align the hinge cover holes
with the holes in the door.
Secure the hinge cover with the 2 tapping
// • /
REASSEMBLE DOOR ASSEMBLY
Make sure there is no dirt or ang other foreign
17. Place the plastic cover onto the inner door and lock
in place with the 4 tabs.
18. Place the outer door onto the inner door.
Top of Door
19. After reversing door, there will be a mismatch between the
outer door and the inner door.
Make sure that the handle part of the outer door is opposite
the hinge as shown.