Installation; Physical Installation - Planet ICA-700 User Manual

2. Installation

The followings are instructions for setting up the IP camera. Refer to the illustration and
follow the simple steps to quickly install.

2.1 Physical Installation

1. Connect an Ethernet cable
Connect one end of an Ethernet cable to the LAN port located on the IP camera's rear
panel and connect the other end to the network device (hub or switch).
2. Attach the external power supply
Attach the provided power adapter to the IP camera's connector labeled "DC 12V" on the
rear panel. If this camera is obtained power from PoE, you don't have to attach the power
adapter.
Note:
Please use the power adapter that is bundled in package. Using a power supply with a
different voltage rating will damage and void the warranty for this product.
3. Connect Microphone and Speaker
If you will use the 2-Way audio function, please connect microphone to Audio In and
speaker to Audio Out.
ICA-700 User Guide
10