XTS DVR72XX-S User Manual page 95

Please refer to the following sheet for detailed information.
Parameter
Channel
Pre-record
Setup
Copy
Save
Refresh
7.3.2.4 RS232
The RS232 interface is shown as in
Figure 7-30
Function
Please select a channel first.
Please input pre-record value here.
System can record the three to five seconds video before activating
the record operation into the file. (Depends on data size).
In F igure 7-29 , click set button, you can go to the corresponding
X 4 5 8 H 4 5 8 H 4 5 8 H 4 6 2 H X
setup interface.
Please set schedule period and then select corresponding record
or snapshot type: schedule/snapshot, motion detection/snapshot,
and alarm/snapshot.
Please select date (Current setup applies to current day by default.
You can draw a circle before the week to apply the setup to the
whole week.)
After complete setup, please go back to
save to save current time period setup.
It is a shortcut menu button. You can copy current channel setup to
one or more (all) channels. The interface is shown as in
7-28 .
X
You can click save button after you complete setup for one channel,
or you can complete the whole setups and then click save button.
Click this button to get device latest configuration information.
F igure 7-31 .
X 4 6 1 H 4 6 1 H 4 6 1 H 4 6 5 H X
F igure 7-29 and then click
X 4 5 9 H 4 5 9 H 4 5 9 H 4 6 3 H X
F igure
X 4 6 0 H 4 6 0 H 4 6 0 H 4 6 4 H
95