XTS DVR72XX-S User Manual page 40

Send email: System can send out email to alert you when alarm occurs.
PTZ activation: Here you can set PTZ movement when alarm occurs. Such as go to preset,
tour &pattern when there is an alarm. Click "select" button, you can see an interface is
shown as in F igure 4-18
X 3 0 5 H 3 0 5 H 3 0 5 H 3 0 9 H
Period: Click set button, you can see an interface is shown as in
set for business day and non-business day. In
interface is shown as in
non-business day.
Anti-dither: Here you can set anti-dither time.
Alarm output: when alarm occurred, system enables peripheral alarm devices.
Tour: Here you can enable tour function when alarm occurs. It is a one-window tour. Please
go to chapter 5.3.9 Display for tour interval setup.
Please highlight icon
save button, system goes back to the previous menu.
Note:
In motion detection mode, you can not use copy/paste to set channel setup since the video in
each channel may not be the same.
In F igure 4-17 , you can left click mouse and then drag it to set a region for motion detection.
X 3 0 9 H 3 0 9 H 3 0 9 H 3 1 3 H X
Click Fn to switch between arm/withdraw motion detection. After setting, click enter button to exit.
.
X
F igure 4-20 . Here you can set your own setup for business day and
X 3 0 8 H 3 0 8 H 3 0 8 H 3 1 2 H X
to select the corresponding function. After all the setups please click
F igure 4-19
X 3 0 6 H 3 0 6 H 3 0 6 H 3 1 0 H
F igure 4-19 , click set button, you can see an
X 3 0 7 H 3 0 7 H 3 0 7 H 3 1 1 H X
Figure 4-16
. Here you can
X
40