Biasi RIVA COMPACT HE M96.24SM/C2 User Manual And Installation Instructions page 12

Instructions for use
H ON--- OFF display
Setting the current time
Note: with a new unit or when the reset button B
has been pressed and the selector switch A is to
the position, the time display G is flashing.
Set the mode selector switch A to the
and press the buttons D or E until the current time
appears in the display G.
The clock starts by moving the switch A to the
AUTO position.
Setting example shown in Fig. 2.13:
Current time 16.30.
Fig. 2.13
Setting the switching time
20 memory locations are available, corresponding
to 10 on--- off sequences.
Set the mode selector switch A to the C1 position.
The symbols shown in Fig. 2.14 appears in the
display.
Fig. 2.14
Press the buttons D or E to set the desired ON
time.
Press the "enter" button C to confirm the setting
and to continue programming the OFF time.
Set the OFF time as explained above for the ON
setting and confirm by pressing the "enter" button
C. Proceed in the same way for other settings.
Setting example shown in Fig. 2.15:
A --- ON time 7.45.
B --- OFF time 10.30.
8
Fig. 2.15
position
Activating the timed settings
Set the mode selector switch A to the AUTO posi-
tion shown in Fig. 2.16.
The current time appears in the display. The ON---
OFF display H indicates the current state of oper-
ation (according to the settings).
A
Fig. 2.16
Note: when the mode selector switch A is in the
AUTO position and the boiler is switched off at the
fused spur isolation switch, the display H indicates
only the OFF state. The other indications are
blanked.
Reading the timed settings
Set the mode selector switch A to the C1 position.
A
The symbols shown in Fig. 2.14 appears in the
display.
Press the "enter" button C. Each time the button
is pressed the display shows the details of the next
setting.
Changing or deleting the timed settings
Set the mode selector switch A to the C1 position.
The symbols shown in Fig. 2.14 appears in the
display.
Press the "enter" button C until the display shows
the setting to be modified or deleted.
The time setting can be modified now by pressing
button D or E and the operation can be switched
on or off by pressing the button F.
A B
A