Pre-Lnstallation Checklist - GE JTP86 Installation Instructions Manual

Installation Instructions
Pre-lnstallation Checklist
Remove packaging materials. Check
inside microwave, behind hinges and
under false bottom. Remove labels on
the outside of the door, plastic on trims
and panel, all tape around the oven,
and any shipping screws securing the
oven to the base pad.
Broiler Pan _Literature
and Grid Pack
Door removal is not a requirement for
installation of the product, but is an
added convenience. To remove the door:
[_ Open the oven door as far as it will go.
[_ ush both hinge
locks down toward
the door frame,
to the unlocked
position. This may
require a flat blade
screwdriver.
Open oven door and remove literature
pack, broiler pan and grid, and oven
racks. Open microwave door and r_
remove shelves and turntable package.
Hinge
_ nlocked
Position
Hinge/_
Slot _
Hinge
Arm
Remove Installation Instructions
from literature pack and read them
carefully before you begin.
Be sure to place all literature,
Owner's Manual, Installations, etc.
in a safe place for future reference.
DO NOT LIFT THE DOOR
BY THE HANDLE!
Place hands on both sides of
the door, and close the oven
door to the removal position.
This is half way between the
broil stop and fully closed.
Lift door up and
out until the
hinge arms
clear the slots.
Hinge Clears Slot
NOTE: The oven door is very heavy.
Be sure you have a firm grip before lifting
the oven door off the hinges. Use caution
once the door is removed. Do not lay the
door on its handle. This could cause dents
or scratches.
(Continued on following page)
3