Step 8, Connect Electrical - GE Monogram ZV900 Installation Instructions Manual

Installation Instructions
INSTALLATION-VENTED T OTHEOUTSIDE
[_ CONNECT ELECTRICAL
Verifg that power is turned off at the source.
WARN ING:
,f house wiring is not 2-wire
with a ground wire, a ground must be provided bg
the installer. When house wiring is aluminum, be sure
to use U.L approved anti-oxidant compound and
aluminum-to-copper connectors.
AVERTISSEMENT :
Si la maison n'est pas cablee avec deux ills et un
fil de terre, I'installateur doit installer un fil de terre.
Quand les ills sont en aluminium, il faut prendre soin
d'utiliser des connecteurs aluminium 6 cuivre avec
une pate antioxgdante approuv6e par U.L
• Remove junction box cover and knockout on the
left side.
Knockout
J-Box
cover
• Secure the house wiring to the junction box with
a strain relief.
House wirinc
J-Box
cover
* Connect white leads to branch circuit white lead.
* Connect black leads to branch circuit black lead.
* Connect green/uellow leads to branch circuit green
lead or bare ground lead.
* Secure all connections with wire nuts on each
electrical connector.
* Push wires into junction box and replace cover.
Be sure wires are not pinched.
* Secure J-Box cover with original screw.
13