Faq - Corinex Intelligent PowerNet Owner's Manual

Example
The connection of two computers over the powerline by
using two Corinex Intelligent PowerNet Ethernet Adapters:
1. Install Corinex Intelligent PowerNet Ethernet Adapter on
2. For connectivity enter the properties (see to user guide of
3. You can check the connection by a simple ping procedure
3.3

FAQ

1. Is the Corinex Intelligent PowerNet Ethernet Adapter still
working if there is an electricity blackout? And will it
resume the transmission automatically after the power
comes back ?
Corinex Intelligent PowerNet Adapters are operational,
when the connected computers are rebooted and the power
is back on.
2. Once the electricity is on after blackout, is the Powernet
put into operation "automatically".
Yes, as soon as the computers are running again. If there is
a problem, unplug the adapter and plug it back into the
connection slot.
3. As the recommended transmission range of Powernet is
around 200 meters, what happens when the distance is
over say 400 meters?
We recommend to try the line for functionality and
performance, before starting operations.
4. Is there any cross talk or interference issue when using
Corinex Intelligent PowerNet Adapters?
Within a PC we don't see any interference with any other
card and/or system. OFDM is a technology, which reduces
any influence coming from another device, that is connected
each one of the two computers (see Installation Guide).
operating system) for this connection and set up an IP
address manually. For example: 192.168.4.1 mask:
255.255.255.0 and another PC set up 192.168.4.2
mask: 255.255.255.0
addressing the IP address of the second PC.
13